Time (s)

Discontinuous Conduction Mode (DCM)

Time (s)

Time (s)

Time (s)

Time (s)

Discontinuous Conduction Mode (DCM)

DCM - CCM Boundary

Continuous Conduction Mode (CCM)

Continuous Conduction Mode (CCM)

LM20133, LM20133Q

www.ti.com

SNVS526F – OCTOBER 2007 – REVISED MARCH 2013

Figure 29. Modes of Operation for LM20133

Design Guide

This section walks the designer through the steps necessary to select the external components to build a fully

functional power supply. As with any DC-DC converter numerous trade-offs are possible to optimize the design

for efficiency, size, or performance. These will be taken into account and highlighted throughout this discussion.

To facilitate component selection discussions the circuit shown in Figure 30 below may be used as a reference.

Unless otherwise indicated all formulas assume units of amps (A) for current, farads (F) for capacitance, henries

(H) for inductance and volts (V) for voltages.

Copyright © 2007–2013, Texas Instruments Incorporated

Submit Documentation Feedback

13

Product Folder Links: LM20133 LM20133Q