BYC5

Preliminary

DIODE

UNISONICTECHNOLOGIESCO.,LTD

3 of 3

www.unisonic.com.tw

QW-R601-024.d



TYPICAL CHARACTERISTICS

Output Diode

150uH typ

500V MOSFET

Fig.1. Typical application, output rectifier in boost

converter power factor correction circuit. Continuous

conduction mode, where the transistor turns on

whilst forward current is still flowing in the diode.

Inductive load

Fig.2. Typical application, freewheeling diode in half

bridge converter. Continuous conduction mode, where

each transistor turns on whilst forward current is still

flowing in the other bridge leg diode.

UTC assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or

other parameters) listed in products specifications of any and all UTC products described or contained

herein. UTC products are not designed for use in life support appliances, devices or systems where

malfunction of these products can be reasonably expected to result in personal injury. Reproduction in

whole or in part is prohibited without the prior written consent of the copyright owner. The information

presented in this document does not form part of any quotation or contract, is believed to be accurate

and reliable and may be changed without notice.