| 전자부품 데이터시트 검색엔진 |
|
LC87F1HC4B 데이터시트(PDF) 21 Page - ON Semiconductor |
|
|
|||||||||||||||||||||||||||||
LC87F1HC4B 데이터시트(HTML) 21 Page - ON Semiconductor |
|
21 / 28 page ![]() LC87F1HC4B www.onsemi.com 21 Pulse Input Conditions at Ta = 40°C to +85°C, VSS1 = VSS2 = VSS3 = 0V Parameter Symbol Pin/Remarks Conditions Specification VDD [V] min typ max unit High/low level pulse width tP1H(1) tP1L(1) INT0(P70), INT1(P71), INT2(P72), INT4(P20 to P23), INT5(P24 to P27), INT6(P20), INT7(P24) Interrupt source flag can be set. Event inputs for timer 0 or 1 are enabled. 2.7 to 5.5 1 tCYC tPIH(2) tPIL(2) INT3(P73) when noise filter time constant is 1/1 Interrupt source flag can be set. Event inputs for timer 0 are enabled. 2.7 to 5.5 2 tPIH(3) tPIL(3) INT3(P73) when noise filter time constant is 1/32 Interrupt source flag can be set. Event inputs for timer 0 are nabled. 2.7 to 5.5 64 tPIH(4) tPIL(4) INT3(P73) when noise filter time constant is 1/128 Interrupt source flag can be set. Event inputs for timer 0 are enabled. 2.7 to 5.5 256 tPIL(5) RMIN(P73) Recognized by the infrared remote control receiver circuit as a signal 2.7 to 5.5 4 RMCK (Note 5-1) tPIL(6) RES Resetting is enabled. 2.7 to 5.5 200 s Note 5-1: Represents the period of the reference clock (1 tCYC to 128 tCYC or the source frequency of the subclock) for the infrared remote control receiver circuit. AD Converter Characteristics at Ta = 40°C to +85°C, VSS1 = VSS2 = VSS3 = 0V Parameter Symbol Pin/Remarks Conditions Specification VDD [V] min typ max unit Resolution N AN0(P00) to AN7(P07), AN8(P70), AN9(P71), AN10(XT1), AN11(XT2) 3.0 to 5.5 8 bit Absolute accuracy ET (Note 6-1) 3.0 to 5.5 1.5 LSB Conversion time TCAD AD conversion time=32 tCYC (when ADCR2=0) (Note 6-2) 4.5 to 5.5 15.68 (tCYC= 0.490µs) 97.92 (tCYC= 3.06µs) s 3.0 to 5.5 23.52 (tCYC= 0.735µs) 97.92 (tCYC= 3.06µs) AD conversion time=64 tCYC (when ADCR2=1) (Note 6-2) 4.5 to 5.5 18.82 (tCYC= 0. 294µs) 97.92 (tCYC= 1.53µs) 3.0 to 5.5 47.04 (tCYC= 0.735µs) 97.92 (tCYC= 1.53µs) Analog input voltage range VAIN 3.0 to 5.5 VSS VDD V Analog port input current IAINH VAIN=VDD 3.0 to 5.5 1 A IAINL VAIN=VSS 3.0 to 5.5 1 Note 6-1: The quantization error (1/2LSB) is excluded from the absolute accuracy. Note 6-2: The conversion time refers to the period from the time when an instruction for starting a conversion process is issued to the time the conversion results register(s) are loaded with a complete digital conversion value corresponding to the analog input value. |
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |