| 전자부품 데이터시트 검색엔진 |
|
CP2103 데이터시트(PDF) 13 Page - Silicon Laboratories |
|
|
|||||||||||||||||||||||||||||
CP2103 데이터시트(HTML) 13 Page - Silicon Laboratories |
|
13 / 36 page ![]() AN169 Rev. 2.3 13 3.16. SI_GetModem Status Description: Gets the Modem Status from the device. This includes the modem pin states. Supported Devices: CP2101/2/3/4/5/8/9 Prototype: SI_STATUS SI_GetModemStatus (HANDLE Handle, PBYTE ModemStatus) Parameters: 1. Handle—Handle to the device as returned by SI_Open. 2. lpbModemStatus—Address of a BYTE variable that contains the current states of the RS-232 modem control lines. The byte is defined as follows: Bit 0: DTR State Bit 1: RTS State Bit 4: CTS State Bit 5: DSR State Bit 6: RI State Bit 7: DCD State Return Value: SI_STATUS = SI_SUCCESS or SI_DEVICE_IO_FAILED or SI_INVALID_HANDLE or SI_INVALID_PARAMETER 3.17. SI_SetBreak Description: Sends a break state (transmit or reset) to a CP210x device. Note that this function is not neces- sarily synchronized with queued transmit data. Supported Devices: CP2101/2/3/4/5/8/9 Prototype: SI_STATUS SI_SetBreak(HANDLE cyHandle, WORD wBreakState) Parameters: 1. Handle—Handle to the device as returned by SI_Open. 2. wBreakState—The break state to set. If this value is a 0x0000 then the break is reset. If this value is a 0x0001 then a break is transmitted. Return Value: SI_STATUS = SI_SUCCESS or SI_DEVICE_IO_FAILED or SI_INVALID_HANDLE or SI_INVALID_PARAMETER |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |