Freescale USB Development Board USB-KW40Z User’s Guide, Rev. 0, 10/2015

Freescale Semiconductor, Inc

3

Safety information

2.2

Regulatory approval for Canada (IC RSS 210)

This equipment complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to

the following two conditions:

1. This board may not cause interference, and

2. This board must accept any interference, including interference that may cause undesired operation

of the device.

2.2.1

26 PART 5 – Appendix

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de

licence. L'exploitation est autorisée aux deux conditions suivantes:

1. l'appareil ne doit pas produire de brouillage, et

2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage

est susceptible d'en compromettre le fonctionnement.

2.3

Electrostatic discharge considerations

Although damage from electrostatic discharge (ESD) is much less common on these devices than on early

CMOS circuits, normal handling precautions should be used to avoid exposure to static discharge.

Qualification tests are performed to ensure that these devices can withstand exposure to reasonable levels

of static without suffering any permanent damage.

All ESD testing is in conformity with the JESD22 Stress Test Qualification for Commercial Grade

Integrated Circuits. During the device qualification ESD stresses were performed for the human body

model (HBM), the machine model (MM) and the charge device model (CDM).

All latch-up test testing is in conformity with the JESD78 IC Latch-Up Test.

When operating or handling the development boards or components, Freescale strongly recommends

using at least the grounding wrist straps plus any or all of the following ESD dissipation methods:

•

Flexible fabric, solid fixed size, or disposable ESD wrist straps

•

Static control workstations, static control monitors, and table or floor static control systems

•

Static control packaging and transportation materials and environmental systems

2.4

Disposal instructions

This product may be subject to special disposal requirements. For product disposal instructions, refer to

freescale.com/productdisposal.