 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
L6362A 데이터시트(PDF) 29 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
L6362A 데이터시트(HTML) 29 Page - STMicroelectronics |
|
|
29 / 37 page  L6362A Protection and diagnostic DocID027660 Rev 4 29/37 11.6 OL (overload) pin The integrated open drain transistor is active (turn-on) in case of overload conditions. Overload is detected when the output current exceeds the IOLS-PEAK or IOHS-PEAK threshold. The open drain transistor is active with a small delay (tOL), after the overload condition is detected. Overload is not detected when EN/DIAG pin is at a low logic level. Overload is not detected in cut-off conditions: if the output stage remains in a current limitation (OL) condition for a time longer than the tdOUT delay, the output stage is turned off (cut-off condition) and the OL pin is released. The output stage is restarted after the trOUT restart time. 11.7 Reverse polarity protection The integrated reverse polarity protection (RPP) avoids any damage in the IC in case of wrong connection of its pins to the supply rail lines. These protected pins, despite reverse polarity, are: VCC, GND, OUTH, OUTL and I/Q. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
