VN7007AHTR datasheet(23/37 Pages) STMICROELECTRONICS

부품명	VN7007AHTR

상세설명	High-side driver with CurrentSense analog feedback

PDF	37 Pages

Scroll/Zoom	100%

제조업체	STMICROELECTRONICS [STMicroelectronics]

홈페이지	http://www.st.com

Logo

23 / 37 page

VN7007AH

Application information

4.4.1

Principle of CurrentSense signal generation

Figure 31: CurrentSense block diagram

Current sense

This output is capable of providing:

•

Current mirror proportional to the load current in normal operation, delivering current

proportional to the load according to known ratio named K

•

Diagnostics flag in fault conditions delivering fixed voltage VSENSEH

The current delivered by the current sense circuit, ISENSE, can be easily converted to a

voltage VSENSE by using an external sense resistor, RSENSE, allowing continuous load

monitoring and abnormal condition detection.

Normal operation (channel ON, no fault, SEn active)

While device is operating in normal conditions (no fault intervention), VSENSE calculation can

be done using simple equations

Current provided by CurrentSense output: ISENSE = IOUT/K

Voltage on RSENSE: VSENSE = RSENSE * ISENSE = RSENSE * IOUT/K

Where :

•

VSENSE is voltage measurable on RSENSE resistor

DocID027957 Rev 2

23/37

VN7007AHTR 데이터시트(PDF) 23 Page - STMicroelectronics