GND

VCC

0.1 F

From

MCU

1A

2A

1Y

2Y

SN74LVC2G07

www.ti.com

SCES308L – AUGUST 2001 – REVISED MAY 2015

9 Application and Implementation

NOTE

Information in the following applications sections is not part of the TI component

specification, and TI does not warrant its accuracy or completeness. TI’s customers are

responsible for determining suitability of components for their purposes. Customers should

validate and test their design implementation to confirm system functionality.

9.1 Application Information

The SN74LVC2G07 is a high-drive CMOS device that can be used to implement a high output drive buffer, such

as an LED application. It can sink 32 mA of current at 4.5 V making it ideal for high-drive and wired-OR/AND

9.2 Typical Application

Figure 3. Typical Application

9.2.1 Design Requirements

1. Recommended Input Conditions

–

Rise time and fall time specs. See (

Δt/ΔV) in the Recommended Operating Conditions table.

–

–

2. Recommend Output Conditions

–

–

Outputs should not be pulled above 5.5 V.

9.2.2 Detailed Design Procedure

This device uses CMOS technology and has balanced output drive. Take care to avoid bus contention because it

can drive currents that would exceed maximum limits. The high drive will also create fast edges into light loads

so routing and load conditions should be considered to prevent ringing.

Copyright © 2001–2015, Texas Instruments Incorporated

Submit Documentation Feedback

9

Product Folder Links: SN74LVC2G07