~2.2M



16 pF

~32 pF

~32pF

50 pF

SN74LVC2G14

(one channel)

SN74LVC2G14

www.ti.com

SCES200O – APRIL 1999 – REVISED AUGUST 2015

9 Application and Implementation

NOTE

Information in the following applications sections is not part of the TI component

specification, and TI does not warrant its accuracy or completeness. TI’s customers are

responsible for determining suitability of components for their purposes. Customers should

validate and test their design implementation to confirm system functionality.

9.1 Application Information

The SN74LVC2G14 device is a high-drive CMOS device that can be used for a multitude of buffer type functions

where the input is slow or noisy. The device can produce 24 mA of drive current at 3.3 V, making it Ideal for

driving multiple outputs and good for high-speed applications up to 100 MHz. The inputs are 5.5-V tolerant

9.2 Typical Application

Figure 4. Typical Application Schematic

9.2.1 Design Requirements

This device uses CMOS technology and has balanced output drive. Care should be taken to avoid bus

contention because it can drive currents that would exceed maximum limits. The high drive will also create fast

edges into light loads so routing and load conditions should be considered to prevent ringing.

9.2.2 Detailed Design Procedure

1. Recommended Input Conditions

–

Rise time and fall time specs. See (

Δt/ΔV) in the Recommended Operating Conditions table.

–

–

2. Recommend Output Conditions

–

–

Copyright © 1999–2015, Texas Instruments Incorporated

Submit Documentation Feedback

9

Product Folder Links: SN74LVC2G14