AD9993-EBZ datasheet(35/56 Pages) AD

35 / 56 page

Data Sheet

AD9993

Rev. A | Page 35 of 56

PRBS GENERATOR CONTROL REGISTER

Address: 0x017, Reset: 0x00, Name: PRBS_GEN_CTRL

Table 21. Bit Descriptions for PRBS_GEN_CTRL

Bits

Bit Name

Description

Reset

Access

STROBE_PRBS_RESET

Reset PRBS generator on strobe lane (transfer not needed).

0x0

0 = normal working if PRBS enabled.

1 = reset the PRBS on strobe lane.

STROBE_PRBS_EN

Enable PRBS testing on strobe lane.

0x0

0 = normal mode working with STROBE_DUTY_CYCLE_EN and

STROBE_SAMPLE_RATE.

1 = test mode only.

Note: needs at least one ADC channel working.

DP_PRBS_GEN_RESET

Pseudorandom binary sequence generator reset (transfer not needed,

ADC indexed).

0x0

0 = PRBS generator enabled.

1 = PRBS generator held in reset.

DP_PRBS_GEN_EN

Enable PRBS generating on ADC data lanes (ADC indexed).

0x0

8-BIT SEED MSB OF PRBS GENERATOR FOR LANE 0 REGISTER

Address: 0x020, Reset: 0x01, Name: PRBS0_SEED_MSB

Table 22. Bit Descriptions for PRBS0_SEED_MSB

Bits

Bit Name

Description

Reset

Access

[7:0]

DP_PRBS0_SEED_MSB

8-bit MSB seed of PRBS generator in Lane 0 (ADC indexed).

The 15-bit LSB is always 0x3AFF.

0x1

AD9993-EBZ 데이터시트(PDF) 35 Page - Analog Devices

AD9993-EBZ 데이터시트(HTML) 35 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56

데이터시트 다운로드

링크 URL