Ka-Band High Power Terminated SPDT PIN Switch

26 - 40 GHz

Rev. V7

MASW-011036

3

3

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

3

Parameter

Absolute Maximum

Reverse Bias Voltage

-50 V

Forward Bias Current

40 mA

CW Incident Power

43 dBm

CW Incident Power

(Terminated Port)

26 dBm

Operating Temperature

-40°C to +85°C

Storage Temperature

-65°C to +150°C

5. Exceeding any one or combination of these limits may cause

permanent damage to this device.

6. M/ACOM does not recommend sustained operation near these

survivability limits.

Bias 1

Bias 2

RF1 Insertion Loss

RF2 Isolation

-15 V (0 mA)

+4 V (+25 mA)

RF2 Insertion Loss

RF1 Isolation

+4 V (+25 mA)

-15 V (0 mA)

Die Outline

Dimensions indicated in μm.

Die Thickness: 100 μm

RF Pads (1, 3, 4): 100 x 200 μm.

DC Bias Pads (2 & 5): 100 x 100 μm.

Meets JEDEC moisture sensitivity level 1 requirements.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive to

electrostatic discharge (ESD) and can be damaged

by static electricity. Proper ESD control techniques

should be used when handling these HBM class 1A

devices.