W.FL-R-SMT-1 datasheet(6/6 Pages) HIROSE

6 / 6 page

(1) Mating/ un-mating

(2) Cable handling

(3) Precautions

1) Mating.

1) Both parts must be aligned on the axis to mate correct. Press down firmly. A tactile “click” will confirm fully

mated condition.

2) Un-mating.

1) Fully insert the tool under the plug’s flanges as shown.

1) Apply even force upward until the plug is free.

Do not twist, apply excessive forces or sharp bends to the cable.

Do NOT forcefully twist or deform wires.

sUsage Precautions

1. Plugs

2. Receptacles

W.FL-LP-040

Cable Assembly

W.FL-R-SMT-1

2N max

Preheating (130ç to 165ç)

Within 2 minutes

40 to 50 seconds

Time

100

120

140

160

180

200

220

240

260

Peak temperature and time

240ç 3 seconds

183ç

［ç］

W.FL Cable

Assembly

W.FL-R-SMT-1

W.FL-LP-N plug extraction tool

The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.

(1) Recommended soldering

temperature profile

(2) Recommended screen thickness

0.1 to 0.12 mm

1) The temperature profile indicates the board surface temperature at the point of contacts with the connector

terminals.

2) The temperature may vary, depending on the board size, the solder paste type and thickness.

Receptacle

The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.

5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN

PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933

http://www.hirose.com

http://www.hirose-connectors.com

W.FL-R-SMT-1 데이터시트(PDF) 6 Page - Hirose Electric

W.FL-R-SMT-1 데이터시트(HTML) 6 Page - Hirose Electric

Html Pages

1 2 3 4 5 6

데이터시트 다운로드

링크 URL