LA200-P datasheet(2/2 Pages) LEM

2 / 2 page

Remarks

•I

S is positive when IP flows in the direction of the arrow.

•Temperature of the primary conductor should not exceed

90°C.

•Dynamic performances (di/dt and response time) are best

with a primary bar in low position in the through-hole.

•In order to achieve the best magnetic coupling, the primary

windings have to be wound over the top edge of the device.

•This is a standard model. For different versions (supply

voltages, turns ratios, unidirectional measurements...),

please contact us.

Mechanical characteristics

•General tolerance

± 0.2 mm

•Primary through-hole

17 x 11 mm

•Fastening & connection of primary 4 pins 0.63 x 0.56 mm

Recommended PCB hole

0.9 mm

•Supplementary fastening

2 holes

∅ 1.75 mm

Recommended PCB hole

2.4 mm

Recommended screws

K A 22 x 6

LEM code

47.30.60.006.0

Dimensions LA 200-P (in mm. 1 mm = 0.0394 inch)

Bottom view

Front view

Left view

Secondary terminals

Terminal - : supply voltage - 12 .. 15 V

Terminal M : measure

Terminal + : supply voltage + 12 .. 15 V

Terminal

: NC

Connection

Standard 00

or N° SP..

year week

swiss

made

LEM reserves the right to carry out modifications on its transducers, in order to improve them, without previous notice.

LA200-P 데이터시트(PDF) 2 Page - LEM

LA200-P 데이터시트(HTML) 2 Page - LEM

Html Pages

1 2

데이터시트 다운로드

링크 URL