+

“COTS” POWER FACTOR CORRECTED

2.66” x 4.75” x 11.50”

APPLIED POWER CONVERSION

Division of

TECHNOLOGY DYNAMICS INC.

AVAILABLE OPTIONS

Design Excellence since 1976!

SPECIFICATIONS

PTCP SERIES

400-1000 WATT SINGLE OUTPUT

SWITCHING POWER SUPPLIES

INPUT SPECIFICATIONS:

ENVIRONMENTAL SPECIFICATIONS

Input: 100-264 VAC Single Phase

Input Frequency: 47-63Hz (400 Hz Optional)

Inrush Current: 60A max at 230VAC(cold start)

Input Current: 6.5A max @ 115VAC 3.5A max @ 230VAC

Efficiency: 85 typical (depending on output model)

Hold-up time: 16ms at full load (minimum)

Leakage Current: <3.5mA maximum @ 240 VAC

Operating Temperature: 0°C to +50°C. Derate to 50% at +70°C

Storage Temperature: -40°C to +85°C max 95% Relative Humidity

Cooling: Internal ball bearing DC fan

Humidity: 20-90% RH non condensing

Vibration: 10-500Hz, 2G 10min/1cycle for 60 min (3 axes)(Standard Unit)

Shock: 20G Peak Acceleration (Standard Unit)

Weight: Approx: 6.6 LBS

Size: 2.66” x 4.75” x 11.50”

The PTCP series 400-1000W AC-DC power

supplies provides highly regulated output power

from 400-1000 watts.Rugged construction and

superior quality make this power supply ideal

for harsh environment applications. Available

in standard, modified or fully custom

configurations, for industrial, commercial,

COTS, Ruggedized and Military applications.

OUTPUT SPECIFICATIONS

Adjustment Range: ±10% (minimum)

Minimum Load: none

Regulation: Line ±0.5% Load ±0.5% Typical

Ripple/Noise: 150mV peak to peak maximum (20 MHz)

Set Point Accuracy: ±1%(except 5V=±2%) (maximum)

Output voltage adj: ±10% minimum

Overcurrent Protection: 105-125% automatic recovery Constant Current

Overlvoltage Protection: 115-140% of V1 nominal

Overtemperature Protection: Heatsink Temp. 90°C ± 5°C Auto Recovery

STANDARD FEATURES

APPLICATIONS

•

SAFETY AND EMISSIONS

•

WER FACTOR CORRECTED

6” x 4.75” x 11.50”

SPECIFICATIONS

A

A

NG POWER SUPPLIES

File: A5269