PI3USB14-ALE datasheet(3/9 Pages) PERICOM

3 / 9 page

PS9055

11/23/10

PI3USB14-A

Low Voltage, High Bandwidth, USB 2.0, 4:1 Mux/DeMuxwith Single Enable

Notes:

1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device.

2. Typical values are at VDD = 3.3V, +25°C ambient.

3. Per LVTTL driven input (control inputs only); Y and In pins do not contribute to ICC. This parameter is guaranteed, but not production tested.

Capacitance

Parameters(5)

Description

Test Conditions

Typ.

Units

CIN

Input Capacitance

VIN = 0V

2.0

COFF(IN)

In Capacitance, Switch Off

2.5

COFF(Y)

Y Capacitance, Switch Off

CON

Y/In Capacitance, Switch On

Power Supply Characteristics

Parameters

Description

Test Conditions(1)

Min. Typ.(2)

Max. Units

ICC

Quiescent Power Supply Current

VDD = 3.6V, VIN = GND or VDD

µA

(TA = 25°C f = 1 MHz)

Notes

1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.

2. Typical values are at VDD = 3.3V, TA = 25°C ambient and maximum loading.

3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.

4. Measured by the voltage drop between Y and In pin at indicated current through the switch. On-Resistance is determined by the lower of the voltages on the

two (Y, In) pins.

5. This parameter is determined by device characterization but is not production tested.

11-0013

PI3USB14-ALE 데이터시트(PDF) 3 Page - Pericom Semiconductor Corporation

PI3USB14-ALE 데이터시트(HTML) 3 Page - Pericom Semiconductor Corporation

Html Pages

1 2 3 4 5 6 7 8 9

데이터시트 다운로드

링크 URL