HMC7992

Data Sheet

Rev. 0 | Page 12 of 13

APPLICATIONS INFORMATION

Generate the evaluation PCB with proper RF circuit design

techniques. Signal lines at the RF port must have a 50 Ω

impedance, and the package ground leads and backside ground

slug must connect directly to the ground plane, as shown in

Figure 23. The evaluation board shown in Figure 23 is available

from Analog Devices, Inc., upon request.

Table 8. Bill of Materials for the EV1HMC7992LP3D1

Evaluation Board

Reference Designator

Description

J1 to J5

PCB mount SMA connectors

C1 to C5

100 pF capacitors, 0402 package

C8 to C10

100 pF capacitors, 0402 package

C13

0.1 μF capacitor, 0402 package

R1 to R2

0 Ω resistors, 0402 package

U1

HMC7992LP3DE SP4T switch

600-01284-00 evaluation PCB

evaluation board.

Figure 23. EV1HMC7992LP3D Evaluation Board