LMV710 datasheet(17/19 Pages) NSC

17 / 19 page

Reel Dimensions

10132554

TAPE

SIZE

DIM A

DIM B

DIM C

DIM D

DIM N

DIM W1

DIM W2

DIM W3

(LSL-USL)

8 mm

7.00

(177.8)

.059

(1.5)

.512 + .020/−.008

(13 +0.5/−0.2)

.795

(20.2)

2.165

(55)

.331 + .059/−.000

(8.4 + 1.5/0)

.567

(14.4)

.311 - .429

(7.9 - 10.9)

Note: UNLESS OTHERWISE SPECIFIED

1. MATERIAL:

POLYSTYRENE/PVC (WITH ANTISTATIC COATING).

OR POLYSTYRENE/PVC, ANTISTATIC

OR POLYSTYRENE/PVC, CONDUCTIVE.

2. CONTROLLING DIMENSION IS MILLIMETER, DIMENSIONS IN

INCHES ROUNDED.

3. SURFACE RESISTIVITY: 1010 OHM/SQ MAXIMUM.

4. ALL OUTPUT REELS SHALL BE UNIFORM IN SHADE.

5. PACKING OF REELS IN CONTAINERS MUST ENSURE NO DAM-

AGE TO THE REEL.

6. SURFACE FINISH OF THE FLANGES SHALL BE SMOOTH,

MATTE FINISH PREFERRED.

7. ALL EDGES, ESPECIALLY THE TAPE ENTRY EDGES, MUST BE

FREE OF BURRS.

8. THE REEL SHOULD NOT WARP IN THE STORAGE TEMPERA-

TURE OF 67˚C MAXIMUM.

9. GLASS TRANSITION TEMPERATURE (Tg) OF THE PLASTIC

REEL SHALL BE LOWER THAN −20˚C.

10. ALL GATING FROM THE MOLD MUST BE PROPERLY RE-

MOVED.

11. NO FLASHES ARE TO BE PRESENT ALONG THE PARTING

LINES.

12. ALLOWABLE RADIUS FOR CORNERS AND EDGES IS .012

INCHES/0.3 MILLIMETERS MINIMUM.

13. SINK MARKS THAT WILL CAUSE A CHANGE TO THE SPECI-

FIED DIMENSIONS OR SHAPE OF THE REELS ARE NOT AL-

LOWED.

14. MOLDED REELS SHALL BE FREE OF COSMETIC DEFECTS

SUCH AS VOIDS. FLASHING, EXCESSIVE FLOW MARKS, ETC.

15. THERE MUST BE NO MISMATCH BETWEEN MATING PARTS.

16. MOLDED REELS SHALL BE ANTISTATIC COATED OR

BLENDED.

17. THE SOT23-5L AND SOT23-6L PACKAGE USE THE 7-INCH

REEL.

LMV710 데이터시트(PDF) 17 Page - National Semiconductor (TI)

LMV710 데이터시트(HTML) 17 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

데이터시트 다운로드

링크 URL