Copyright © 2016 Future Technology Devices International Limited

1

FT260 HID-CLASS USB TO UART/I2C BRIDGE IC

Version 1.0

Doc ument N o.: FT _001272 C learance N o.: FT DI#484

Future Technology Devices

FT260

Bridge IC)

Device Controller with the following advanced

features:



standard Human Interface Device (HID) class

support



USB2.0 compliant Full Speed device with entire

USB protocol handled on the chip.



Support

2

USB

HID

Interfaces,

each

corresponding

to

the

on-chip

physical



Pin configuration of enabling HID interface for

variety of application







Specification, standard mode (SM), fast mode

(FM), Fast mode plus (FM+), and High Speed

mode (HS)



Robust FTDI UART controller with hardware and

software flow control



Data transfer rate from 1.2 Kbuad to 12 Mbaud

(RS422, RS485, RS232) at TTL levels



Configurable GPIOs can be easily controlled by

software applications under HID class via the

USB bus



Fully integrated oscillator PLL with no external

crystal required



On-chip eFUSE for USB Vendor ID (VID),

Product ID (PID), and other vendor specific

parameters.



Unique USB serial number generation engine

and programming path to external EEPROM.



Integrated 5V-3.3V-1.8V level converter for

USB I/O.



+5V USB VBUS detection engine



USB Power Configurations; supports

bus-

powered, self-powered and bus-powered with

power switching.



USB2.0 Low operating and suspend current;

24mA (active-typ) and 385µA (suspend-typ).



True 3.3V CMOS drive output and TTL input.

(operates down to 1V8 with external pull-ups)



Multiple I/O operating voltage level +3.3V,

+2.5V, +1.8V



pin output drive strength; 4 mA(min) and 16

mA(max)



Integrated power-on-reset circuit.



USB Battery Charger Detection.



UHCI / OHCI / EHCI / XHCI host controller

compatible.



Extended operating temperature range; -40 to

85⁰C.



Available in compact Pb-free 28 Pin WQFN

packages (RoHS compliant).

N either the whole nor any part of the information c ontained in, or the product desc ribed in this manual, may be adapted or re produced

in any material or electronic form without the prior written cons ent of the copyright holder. This product and its documen tation are

s upplied on an as-is basis and no warranty as to their s uitability for any partic ular purpose is either made or implied. Future T ec hnology

Devices International Ltd will not accept any claim for damages hows oever aris ing as a res ult of us e or fa ilure of this produc t. Y our

s tatutory rights are not affec ted. T his produc t or any variant of it is not intended for use in any medical appliance, device or sys tem in

whic h the failure of the produc t might reasonably be expec ted to res ult in personal injury. T his doc ument provides preliminary

information that may be s ubjec t to c hange without notice. N o freedom to us e patents or other intellec tual property rights is implied by

the public ation of this doc ument. Future T ec hnology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow

G41 1HH U nited Kingdom. S c otland Registered C ompany N umber: S C136640