4423

SBFS020A − JANUARY 1978 − REVISED JUNE 2004

www.ti.com

2

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate

precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to

damage because very small parametric changes could cause the device not to meet its published specifications.

ORDERING INFORMATION

PRODUCT

PACKAGE-LEAD

PACKAGE

DESIGNATOR(1)

SPECIFIED

TEMPERATURE

RANGE

PACKAGE

MARKING

ORDERING NUMBER

TRANSPORT MEDIA,

QUANTITY

4423

PDIP-14

NSQ

0

°C to +70°C

4423P

4423P

Tube, 50

(1) For the most current package and ordering information, see the package option addendum located at the end of this data sheet.

ABSOLUTE MAXIMUM RATINGS

over operating free-air temperature range unless otherwise noted(1)

4423

UNIT

Supply voltage

±18

V

Output short to common

Continuous

Operating temperature

−25 to +85

°C

Storage temperature

−55 to +125

°C

Lead temperature (soldering, 10s)

300

°C

(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.