MODelnUMbeRIngkey

MWR 28 512 T F / ES

Base Model

Input Voltage

Output Voltage

Screening

Number of Outputs

Case Option

(Non-flanged case has no designator in

this position)

(T = triple)

(Main and aux. Vout for triple models)

(Standard screening has no designator

in this position)

SMDnUMbeRS

(SMd)

5962-XXXXX01HXC IN pROCESS MWR283R312T/883

5962-XXXXX02HXC IN pROCESS MWR283R315T/883

5962-XXXXX03HXC IN pROCESS MWR28512T/883

5962-XXXXX04HXC IN pROCESS MWR28515T/883

The SMD number shown is for Class H screening, non-flanged. To

indicate the flanged case option change the “X” to “Z” In the SMD

number. For exact specifications for an SMD product, refer to the SMD

drawing. SMDs can be downloaded from:

http://www.landandmaritime.dla.mil/programs/smcr

each category in the forM below

.

CaTegORy

baseModeland

InputVoltage

numberof

options

MWR28

3R312, 3R315T,

T

(non-flanged, leave blank)

(standard, leave blank)

512T, 515T

F (flanged)

ES

883

FIllInFOR

MODel#

MWR28

/

Notes

1. Output Voltage: An R indicates a decimal point. 3R312T is 3.3 volts main and ±12 volts auxiliaries.

2. Number of Outputs: T is a triple output.

3. Case Options: For the standard case, Figure 15 on page 13, leave the case option blank. For the flanged case option, Figure 16 on page 14, insert the letter

F in the Case Option position.

4. Screening: For standard screening leave the screening option blank. For other screening options, insert the desired screening level. For more information see

Table 10 on page 15 and Table 11 on page 16.

Crane Aerospace & Electronics Power Solutions

MWRTripleDC-DCConverters

14TO50VOlTInpUT-35WaTT

www.craneae.com/interpoint

MWR Rev AD - 2016.05.20

page 4 of 16