SS1034

Unipolar Hall-Effect Digital Switch

2

V3.10

Nov 1, 2013

General

Description

The SS1034 is a unipolar Hall-effect sensor IC fab-

ricated from bipolar technology. The device inte-

grates a voltage regulator, reverse battery protec-

tion diode, Hall sensor with dynamic offset can-

cellation system, temperature compensation cir-

cuitry, small signal amplifier, Schmitt trigger and

an open-collector output to sink up to 25 mA.

With suitable output pull up, they can be used with

bipolar or CMOS logic circuits.

These Hall-effect switches are monolithic integrat-

ed circuits with tighter magnetic specifications, de-

signed to operate continuously over extended tem-

peratures to +150°C,and are more stable with both

temperature and supply voltage changes. The uni-

polar switching characteristic makes these devices

ideal for use with a simple bar or rod magnet.

Thanks to its wide operating voltage range and ex-

tended choice of temperature range, it is quite suit-

able for use in automotive, industrial and consumer

applications.

The device is delivered in a Small Outline Transis-

tor (SOT) or in a Plastic Single In Line (SIP 3L

flat). Both 3-lead packages are RoHS compliant.

Glossary of Terms

MilliTesla (mT), Gauss

Units of magnetic flux density: 1mT = 10 Gauss

RoHS

Restriction of Hazardous Substances

Magnetic flux density applied on the branded side of the package which turns the

Release Point (BRP)

Magnetic flux density applied on the branded side of the package which turns the