SPECIFICATIONS

PHYSICAL CHARACTERISTICS for single plate:

DIAMETER ......................................................... 33 mm

ACTIVE DIAMETER ............................................. 25 mm

THICKNESS ........................................................ 0.317 mm

FLATNESS .......................................................... <+.015mm

PORE SIZE .......................................................... 5

CENTER-TO-CENTER SPACING ............................ 5.8

BIAS ANGLE ...................................................... 12°

L/D RATIO .......................................................... 56:1

OPEN AREA RATIO ............................................. 58%

ELECTRICAL CHARACTERISTICS for matched set:

RESISTANCE ...................................................... 75 M

W

PULSE WIDTH .................................................... 1 ns, depending upon

......................................................................... detector impedance

MAXIMUM COUNT RATE .................................. 10 MHz

DARK COUNT RATE ........................................... *5 counts/sec./cm2 @ 2.0kV

PULSE HEIGHT RATIO ......................................... 70-100%

* measurement based on a chevron pair

Export of this product is

regulated by the U.S. Dept. of

State in accordance with

guidelines of “International

Traffic in Arms Regulations

(ITAR)” per Title 22, Code of

Federal Regulations, Parts 120-

130. Approved for Unlimited

Public Release per 02-S-0323

Form 519B-0203

Subsidiary of ITT Industries, Inc. All rights

reserved. Specifications subject to

change without notice and are believed

to be reliable; however, should not be

construed as a warranty of performance

and no express or implied warranty is

made with respect to same.

11 Interstate Drive

West Springfield, MA 01089-4531 USA

(413) 263-6200 • 800-442-4334 • fax: (413) 737-0608

http://www.kandm.com

K and M Electronics