LP5900TLX-2.8SLASHNOPB datasheet(6/30 Pages) TI1

6 / 30 page

LP5900

SNVS358R – JULY 2005 – REVISED JUNE 2016

www.ti.com

Product Folder Links: LP5900

Submit Documentation Feedback

Electrical Characteristics (continued)

Unless otherwise noted, specifications apply in Figure 16 with: VIN = VOUT (NOM) + 1 V, VEN = 1.2 V, CIN = COUT = 0.47 μF, IOUT

= 1 mA.

(1)(2)

PARAMETER

TEST CONDITIONS

MIN

TYP

MAX

UNIT

TRANSIENT CHARACTERISTICS

ΔVOUT

Line transient(8)

VIN = (VOUT(NOM) + 1 V) to (VOUT(NOM) +

1.6 V) in 30

μs, IOUT = 1 mA, –40°C ≤ TJ ≤

125°C

−2

VIN = (VOUT(NOM) + 1.6 V) to (VOUT(NOM) +

1 V) in 30

μs, IOUT = 1 mA, –40°C ≤ TJ ≤

125°C

Load transient(8)

IOUT = 1 mA to 150 mA in 10 μs, –40°C ≤

TJ ≤ 125°C

−110

IOUT = 150 mA to 1 mA in 10 μs, –40°C ≤

TJ ≤ 125°C

Overshoot on start-up(8)

–40°C

≤ TJ ≤ 125°C

Turnon time

To 95% of VOUT(NOM)

150

300

μs

(1)

The minimum capacitance must be greater than 0.33 µF over the full range of operating conditions. The capacitor tolerance must be

30% or better over the full temperature range. The full range of operating conditions for the capacitor in the application should be

considered during device selection to ensure this minimum capacitance specification is met. TI recommends X7R capacitors; however,

capacitor types X5R, Y5V and Z5U may be used with consideration of the application and conditions.

6.6 Output and Input Capacitor, Recommended Specifications

(1)

PARAMETER

TEST CONDITIONS

MIN

NOM

MAX

UNIT

CIN

Input capacitance

Capacitance for stability

0.47

µF

Capacitance for stability, –40°C

≤ TJ ≤

125°C

0.33

COUT

Output capacitance

Capacitance for stability

0.47

Capacitance for stability, –40°C

≤ TJ ≤

125°C

0.33

ESR

Output/Input capacitance

500

Ω

LP5900TLX-2.8/NOPB 데이터시트(PDF) 6 Page - Texas Instruments

LP5900TLX-2.8/NOPB 데이터시트(HTML) 6 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

데이터시트 다운로드

링크 URL