| 전자부품 데이터시트 검색엔진 |
|
TLK2201RCPR 데이터시트(PDF) 10 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
TLK2201RCPR 데이터시트(HTML) 10 Page - Texas Instruments |
|
10 / 24 page ![]() www.ti.com ABSOLUTE MAXIMUM RATINGS (1) DISSIPATION RATING TABLE (1) THERMAL CHARACTERISTICS TLK2201 TLK2201I ETHERNET TRANSCEIVERS SLLS420F – JUNE 2000 – REVISED SEPTEMBER 2007 over operating free-air temperature (unless otherwise noted) UNIT Supply voltage, VDD (2) -0.3 V to 3 V Input voltage range at TTL terminals, VI -0.5 V to 4 V Input voltage range at any other terminal -0.3 V to VDD +0.3 V Storage temperature, Tstg -65 °C to 150°C Electrostatic discharge CDM: 1 kV, HBM:2 kV TLK2201 0 °C to 70°C Characterized free-air operating temperature range: TLK2201I -40 °C to 85°C (1) Stresses beyond those listed under„ absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under„ recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) All voltage values, except differential I/O bus voltages, are with respect to network ground terminal. TA≤ 25°C OPERATING FACTOR(2) TA = 70°C PACKAGE POWER RATING ABOVE TA = 25°C POWER RATING RCP64(3) 5.25 W 46.58 mW/ °C 2.89 W RCP64(4) 3.17 W 23.70 mW/ °C 1.74 W RCP64(5) 2.01 W 13.19 mW/ °C 1.11 W (1) For more information, refer to TI application note PowerPAD Thermally Enhanced Package, TI literature number SLMA002. (2) This is the inverse of the traditional junction-to-ambient thermal resistance (RΘJA). (3) 2 oz. Trace and copper pad with solder. (4) 2 oz. Trace and copper pad without solder. (5) Standard JEDEC high-K board PARAMETER TEST CONDITION MIN TYP MAX UNIT Board-mounted, no air flow, high conductivity TI recommended test board, chip soldered or greased 21.47 to thermal land RΘJA Junction-to-free-air thermal resistance Board-mounted, no air flow, high conductivity TI °C/W recommended test board with thermal land but no 42.20 solder or grease thermal connection to thermal land Board-mounted, no air flow, JEDEC test board 75.83 Board-mounted, no air flow, high conductivity TI recommended test board, chip soldered or greased 0.38 to thermal land RΘJC Junction-to-case-thermal resistance Board-mounted, no air flow, high conductivity TI °C/W recommended test board with thermal land but no 0.38 solder or grease thermal connection to thermal land Board-mounted, no air flow, JEDEC test board 7.8 10 Submit Documentation Feedback Copyright © 2000–2007, Texas Instruments Incorporated Product Folder Link(s): TLK2201 TLK2201I |
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |