| 전자부품 데이터시트 검색엔진 |
|
TNETV2840ENGGU 데이터시트(PDF) 43 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
TNETV2840ENGGU 데이터시트(HTML) 43 Page - Texas Instruments |
|
43 / 91 page ![]() Functional Overview 43 December 1999 − Revised October 2008 SPRS122F 3.2.4 Hardware Timer Each 5441 subsystem has one independent software programmable timer. The memory-mapped registers control the operation of the timer. The timer resolution is the clock rate of the CPU. The timer output shares the pin with GPIO3 and is controlled by GPIO register bit 15. The timer supports a 32-bit dynamic range. The timer consists of a programmable 16-bit main counter and a programmable prescalar. The main counter is driven by the prescalar, which decrements by one at every CPU clock. Once the prescalar reaches zero, the 16-bit counter decrements by one. When the 16-bit counter decrements to zero, a maskable interrupt (TINT) is generated and the timer output pin (TOUT) asserts an active-high pulse (2H − 2 ns, H = 0.5 clock cycle). The timer output pulse is driven on GPIO3 when the TOUT bit is set to high in the GPIO register. When the timer is configured in continuous mode, the timer counter and prescalar will be reloaded accordingly after the timer counter exhausts. The timer can be stopped, restarted, reset, or disabled via the bits of the timer control register. There are four 16-bit registers associated with the timer. • Timer counter register (TIM) • Timer period register (PRD) • Timer control register (TCR) • Timer second control register (TSCR) 3.2.4.1 TIM Register This register is loaded with the period register (PRD) value and decrements once the PRD value is loaded. 3.2.4.2 PRD Register This register is used to reload the timer counter register (TIM). 3.2.4.3 TCR Register This register provides the control and status information. TCR bit fields are shown in Figure 3−21 and described in Table 3−10. 15 14 13 12 11 10 98 7 6 5 43210 Reserved SOFT FREE PSC TRB TSS TDDR R/W+0 R/W+0 R/W+0 R/W+0 R/W+0 R/W+0 LEGEND: R = Read, W = Write, +0 = Value at reset Figure 3−21. Timer Control Register (TCR) |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |