UPC339 datasheet(2/12 Pages) NEC

2 / 12 page

µPC339

ABSOLUTE MAXIMUM RATINGS (TA = 25

°C)

Parameter

Symbol

Ratings

Unit

Voltage between V+ and V–

Note 1

V+ –V–

–0.3 to +36

Differential Input Voltage

VID

±36

Input Voltage

Note 2

V– –0.3 to V– +36

Output Voltage

Note 3

V– –0.3 to V– +36

Power Dissipation

C Package

Note 4

570

G2 Package Note 5

550

Output Short Circuit Duration

Note 6

Indefinite

sec

Operating Ambient Temperature

–20 to +80

°C

Storage Temperature

Tstg

–55 to + 125

°C

Notes 1. Reverse connection of supply voltage can cause destruction.

2. The input voltage should be allowed to input without damage or destruction independent of the

magnitude of V+. Either input signal should not be allowed to go negative by more than 0.3 V. The normal

operation will establish when any input is within the Common Mode Input Voltage Range of electrical

characteristics.

3. This specification is the voltage which should be allowed to supply to the output terminal from external

without damage or destruction independent of the magnitude of V+. Even during the transition period

of supply voltage, power on/off etc., this specification should be kept.

4. Thermal derating factor is –7.6 mW/

°C when operating ambient temperature is higher than 55 °C.

5. Thermal derating factor is –5.5 mW/

°C when operating ambient temperature is higher than 25 °C.

6. Short circuits from the output to V+ can cause destruction. Pay careful attention to the total power

dissipation not to exceed the absolute maximum ratings, Note 4 and Note 5.

RECOMMENDED OPERATING CONDITIONS

Parameter

Symbol

MIN.

TYP.

MAX.

Unit

Supply Voltage (Split)

±1

±16

Supply Voltage (V– = GND)

V+

+32

UPC339 데이터시트(PDF) 2 Page - NEC

UPC339 데이터시트(HTML) 2 Page - NEC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

데이터시트 다운로드

링크 URL