PC87365 datasheet(171/215 Pages) NSC

171 / 215 page

10.0 Temperature Sensor (TMS) (Continued)

171

www.national.com

Figure 35. OTS and ALERT Temperature Response Diagrams

10.2.3

ALERT Response Read Sequence

The Read Channel Temperature register (RDCHT) holds the temperature value most recently read from the channel. The

Temperature Event Status register (TEVSTS) indicates any ALERT detected as long as VSB is maintained. ALERTs are

cleared by software.

When an IRQ or SMI is received, check the TEVSTS register to see which of the sensors detected an out-of-limit readout,

access the channel readouts, read the current value and status information and clear any pending status bits.

10.2.4

Power-On Reset Default States

TMS always powers up in a known state. TMS power-up default conditions are:

1. Local temperature set to 0

°C.

2. Remote temperature set to 0

°C until the TMS senses a diode present on D+ and D- input pins.

3. Status register set to 00h.

4. Command register set to 00h; ALERT and OTS enabled and Standby mode deactivated.

5. Local and Remote TOS set to 127°C.

6. Local and Remote THIGH set to 127°C.

7. Local and Remote TLOW set to -55°C.

OTS

Indicates when temperature is sampled by the A/D Converter.

TOS1

TOS2

THIGH

TLOW

ALERT

Indicates when temperature is sampled by the A/D Converter.

a: ALERT Signal

b: OTS Signal

TOS2

TLOW2

OTS

Indicates when temperature is sampled by the A/D Converter.

THIGH2

TLOW1

THIGH1

TOS1

ALERT

c: Combined ALERT and OTS Signals

PC87365 데이터시트(PDF) 171 Page - National Semiconductor (TI)

PC87365 데이터시트(HTML) 171 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL