 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
CAP1214 데이터시트(PDF) 43 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
CAP1214 데이터시트(HTML) 43 Page - Microchip Technology |
|
|
43 / 107 page  Multiple Channel Capacitive Touch Sensor and LED Driver Datasheet SMSC CAP1214 43 Revision 1.0 (08-30-10) DATASHEET re-set when another interrupt is generated in the “DOWN” direction. This bit is automatically cleared if the UP bit is set. Bit 5 - CS6 - Indicates that a press was detected on Sensor 6. This sensor can be linked to LED6. ‘0’ - A touch was not detected on the corresponding button. ‘1’ - A touch was detected on the corresponding button. Bit 4 - CS5 - Indicates that a press was detected on Sensor 5. This sensor can be linked to LED5. Bit 3 - CS4 - Indicates that a press was detected on Sensor 4. This sensor can be linked to LED4. Bit 2 - CS3 - Indicates that a press was detected on Sensor 3. This sensor can be linked to LED3 Bit 1 - CS2 - Indicates that a press was detected on Sensor 2. This sensor can be linked to LED2. Bit 0 - CS1 - Indicates that a press was detected on Sensor 1. This sensor can be linked to LED1. 6.2.2 Button Status 2 Bit 7 - CS14 - Indicates that press was detected on Sensor 14. This sensor is part of the group which can be linked to LED9 and LED10. Bit 6 - CS13 - Indicates that press was detected on Sensor 13. This sensor is part of the group which can be linked to LED9 and LED10. Bit 5 - CS12 - Indicates that press was detected on Sensor 12. This sensor is part of the group which can be linked to LED9 and LED10. Bit 4 - CS11 - Indicates that press was detected on Sensor 11. This sensor is part of the group which can be linked to LED9 and LED10. Bit 3 - CS10 - Indicates that press was detected on Sensor 10. This sensor is part of the group which can be linked to LED9 and LED10. Bit 2 - CS9 - Indicates that press was detected on Sensor 9. This sensor is part of the group which can be linked to LED9 and LED10. Bit 1 - CS8 - Indicates that press was detected on Sensor 8. This sensor is part of the group which can be linked to LED9 and LED10. Bit 0 - CS7 - Indicates that a press was detected on Sensor 7. This sensor can be linked to LED7. 6.3 Build Revision Register The Build Revision Register indicates hardware defined settings that are used. Table 6.4 Build Revision Register ADDR R/W REGISTER B7 B6 B5 B4 B3 B2 B1 B0 DEFAULT 05h R Build Revision - - - Build4 Build3 Build2 Build1 Build0 10h |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
