LM13600M datasheet(3/24 Pages) NSC

3 / 24 page

Electrical Characteristics (Note 5) (Continued)

Note 1: “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is

functional, but do not guarantee specific performance limits.

Note 2: For selections to a supply voltage above ±22V, contact factory.

Note 3: For operating at high temperatures, the device must be derated based on a 150˚C maximum junction temperature and a thermal resistance of 175˚C/W

which applies for the device soldered in a printed circuit board, operating in still air.

Note 4: Buffer output current should be limited so as to not exceed package dissipation.

Note 5: These specifications apply for VS = ±15V, TA = 25˚C, amplifier bias current (IABC) = 500 µA, pins 2 and 15 open unless otherwise specified. The inputs to

the buffers are grounded and outputs are open.

Note 6: These specifications apply for VS = ±15V, IABC = 500 µA, ROUT = 5kΩ connected from the buffer output to −VS and the input of the buffer is connected

to the transconductance amplifier output.

Schematic Diagram

Typical Performance Characteristics

One Operational Transconductance Amplifier

DS007980-1

Input Offset Voltage

DS007980-39

Input Offset Current

DS007980-40

Input Bias Current

DS007980-41

LM13600M 데이터시트(PDF) 3 Page - National Semiconductor (TI)

LM13600M 데이터시트(HTML) 3 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

데이터시트 다운로드

링크 URL