LPS200-M Series Data Sheet

Environmental Specifications

Operating temperature

0 °C to 50 °C ambient derate each output as 2.5% per degree from 50° to 70 °C. -20 °C start up

Storage temperature

-40 °C to +85 °C

Electromagnetic susceptibility

Designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3

Humidity

Operating; non-condensing 10% to 95% RH

Vibration

IEC68-2-6 to the levels of IEC721-3-2

MTBF calculated

1 million hours at full load and 25 °C ambient conditions. 230 Vac input, Bellcore

Pin Assignments

Connector

LPS200-M

SK1

Pin 1

Neutral

Pin 3

Line

SK2

TB-1

Common

TB-2

Main output

SK3

Pin 1

+V1 Remote sense

Pin 2

-V1 Remote sense

Pin 3

N/C

Pin 4

N/C

Pin 5

+Power fail

Pin 6

Common

Pin 7

N/C

Pin 8

Common

Pin 9

+12 V Fan

Pin 10

+12 Fan Return (isolated)

Mating Connectors

AC Input

(SK1)

Molex 09-50-8031 (connector)

PINS: 08-52-0072

AC Ground

Molex 01-90020001

DC Output (SK2) Molex 19141-0058/0063 or 19099-0044/0048

Spade lug based on Cable Ampacity/AWG

Control Sense

(SK3)

Molex 90142-0010 (USA)

PINS: 90119-2110 or

Amp: 87977-3

PINS: 87309-8

Artesyn Embedded Technologies Connector Kit #70-841-020,

includes all of the above.

1. Specifications subject to change without notice.

2. All dimensions in inches (mm), tolerance is ± 0.02” (± 0.5 mm)

3. Mounting holes MH1 and MH2 should be grounded for EMI purposes.

4. Mounting hole MH1 is safety ground connection.

5. Specifications are for convection rating at factory settings at 115 VAC input, 25 °C

unless otherwise stated.

6. This power supply requires mounting on metal standoffs 0.20” (5m) in height.

7. Warranty: 2 years

8. Weight: 0.75 lb/0.34 kg

Ordering Information

Model Number

Output Voltage

Minimum

Load

Maximum Load with

Convection Cooling

Maximum Load with

30CFM Forced Air

Peak Load

Ripple

LPS202-M

5 V

0 A

20 A

40 A

44 A

± 2%

50 mV

LPS203-M

12 V

0 A

10.3 A

20.8 A

22 A

± 2%

120 mV

LPS204-M

15 V

0 A

8.3 A

16.6 A

18 A

± 2%

150 mV

LPS205-M

24 V

0 A

5.2 A

10.4 A

11.5 A

± 2%

240 mV

LPS208-M

48 V

0 A

2.6 A

5.2 A

5.8 A

± 2%

480 mV

1. Peak current lasting <30 seconds with a maximum 10% duty cycle.

2. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.

3. Peak-to-peak with 20 mHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges.

4. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC

compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is

not intended for sale to End Users.