Copyright © 2016 Future Technology Devices International Limited

7

NerO Module Datasheet

Version 1.0

Doc ument Reference N o.: FT _001285

C learance N o.: FT DI#4 85

When a USB cable is inserted, the VBUS will supply the 5V to all the peripheral and 3.3V LDO .

Figure 3 - USB Power Supply

4.2 Micro-controller

The on-board Arduino controller is the Atmega328P 32-pin TQFP microcontroller from ATMEL’s 8-bit

Microcontroller family. This microcontroller runs at 16MHZ from a 5V power supply. For further details of

the Atmega328P Microcontroller, refer to the Atmega328P datasheet.

Figure 4 - Atmega328P Micro-controller