Product # MCOTS-F-270-P-QT

Phone 1-888-567-9596

Doc.# 005-0005521

Rev. H

10/20/16

Page 8

MCOTS-F-270-P-QT

Mil-COTS MIL-STD-810G Qualification Testing

MIL-STD-810G Test

Method

Description

Fungus

508.6

Table 508.6-I

Altitude

500.5 - Procedure I

Storage: 70,000 ft / 2 hr duration

500.5 - Procedure II

Operating: 70,000 ft / 2 hr duration; Ambient Temperature

Rapid Decompression

500.5 - Procedure III

Storage: 8,000 ft to 40,000 ft

Acceleration

513.6 - Procedure II

Operating: 15 g

Salt Fog

509.5

Storage

High Temperature

501.5 - Procedure I

Storage: 135 °C / 3 hrs

501.5 - Procedure II

Operating: 100 °C / 3 hrs

Low Temperature

502.5 - Procedure I

Storage: -65 °C / 4 hrs

502.5 - Procedure II

Operating: -55 °C / 3 hrs

Temperature Shock

503.5 - Procedure I - C

Storage: -65 °C to 135 °C; 12 cycles

Rain

506.5 - Procedure I

Wind Blown Rain

Immersion

512.5 - Procedure I

Non-Operating

Humidity

507.5 - Procedure II

Aggravated cycle @ 95% RH (Figure 507.5-7 aggravated temp - humidity cycle, 15 cycles)

Random Vibration

514.6 - Procedure I

Shock

516.6 - Procedure I

20 g peak, 11 ms, Functional Shock (Operating no load) (saw tooth)

516.6 - Procedure VI

Bench Handling Shock

Sinusoidal vibration

514.6 - Category 14

Rotary wing aircraft - helicopter, 4 hrs/axis, 20 g (sine sweep from 10 - 500 Hz)

Sand and Dust

510.5 - Procedure I

Blowing Dust

510.5 - Procedure II

Blowing Sand

EMI

Military Standard 461 Compliance Matrix

This table shows the MIL-STD-461 requirements/limits that will be met* by the stand-alone setups indicated below:

Mil-Std-461

MIL-STD-461D/E/F

Requirement

Most Stringent Limit Listed

Conducted Emissions

CE101

CE102

Submarine

Basic Curve

Conducted Susceptibility

CS101

CS106

CS114

CS115

CS116

Curve #2

461F Only

Curve #5

Basic Waveform

Imax = 10A

Radiated Emissions

RE101

Navy

RE102†

Submarine

Fixed Wing Internal, >25 meters Nose to Tail

Radiated Susceptibility

RS101

RS103

Army

Aircraft External

* Susceptibility requirements/limits are considered to be met as long as transient deviations in the converter’s output voltage remain within ±10% of its initial

value.

† Met with metal screen shield covering the filter, converter, and resistive load.

‡ In almost every case the limit listed is the most stringent of the requirements. The one exception is CE03 - High Frequency Broadband Conducted

Emissions, Converter with Passive Filter. In this case the filter and converter passed the A1 limit. The filter and converter pass the CE03 - Narrowband

Conducted Emissions at the A5 limit level.

MCOTS

• MCOTS-F-28-P Filter

• MCOTS-28-05S Converter

• 120W Resistive load

• Metal Chassis Plane

• MCOTS-F-270-P Filter

• MCOTS-270-05-QT Converter