Product # MQME-270-R

Phone 1-888-567-9596

www.synqor.com

Doc.# 005-0006166 Rev. E

05/31/2016

Page 5

MQME-270-R

Technical Specification

-180

-160

-140

-120

-100

-80

-60

-40

-20

0

20

0.01

0.1

1

10

100

1000

10000

100000

Frequency (kHz)

Common Mode

Differential Mode

0.01

0.1

1

10

100

0.01

0.1

1

10

100

1000

Frequency (kHz)

Figure 1: Typical Common Mode and Differential Mode

Attenuation provided by the filter as a function of frequency.

Both input lines are connected to chassis ground through 50Ω

resistors. The filter case is also connected to chassis ground.

Figure 2: Typical Output Impedance (magnitude) of the filter

looking back into its output pins with the input pins connected

to a source with zero source impedance.

Figure 3: MIL-STD-461E Method CE101 Low Frequency

Conducted Emissions. Limit line (in brown) is the ‘Submarine

Applications DC Curve’. Setup described on Page 6.

Figure 4: MIL-STD-461E Method CE102 High Frequency

Conducted Emissions. Limit line (in brown) is the ‘Basic Curve’.

Setup described on Page 6.

Figure 5: MIL-STD-461E Method RE101 Low Frequency

Radiated Emissions. Limit line (in brown) is the ‘Standard

Curve’ from MIL-STD-461C Method RE01, which is more strict

than all RE101 limits. Setup described on Page 6.

Figure 6: MIL-STD-461E Method RE102 High Frequency

Radiated Emissions. Limit line (in brown) is the ‘Submarine

External to Pressure Hull Curve’. Setup described on Page 6.