REF01

ASD0016521 Rev. F | Page 4 of 4

Table III - Endpoint and Delta Limits (+25°C)

(Product is tested in accordance with Table II with the following exceptions)

Parameter

Symbol

Sub-

groups

End-point

Delta

Units

Min

Max

Output Voltage

VO

1

9.95

10.05

±0.006

V

5.0

Life Test/Burn-In Information

5.1

HTRB is not applicable for this drawing.

5.2

Burn-in is per MIL-STD-883 Method 1015 test condition B.

5.3

Steady state life test is per MIL-STD-883 Method 1005

6.0

Application Note

6.1

No external components required.

6.2

The REF01 trim terminal can be used to adjust the output voltage over a 10V ±300mV range. This feature allows

the system designer to trim system errors by setting the reference to a voltage other than 10V. Of course, the

output can also be set to exactly 10.000V, or to 10.240V for binary applications.

Adjustment of the output does not significantly affect the temperature performance of the device. Typically, the

temperature coefficient change is 0.7ppm/°C for 100mV of output adjustment.

Vout Trim Circuit

Rev

Description of Change

Date

A

Initiate

12-MAR-2008

B

Update document format.

6-JAN-2009

C

Updated Section 4.0c note to indicate pre-screen temp testing being performed.

5-JUN-2009

D

Removed “ADI INTERNAL USE” from page 1 of ASD

13-JUL-2009

E

Updated fonts and sizes to ADI standard

7- Oct-2011

F

Added Application note for no external components required

13-Dec-2013

© 2013 Analog Devices, Inc. All rights reserved. Trademarks and

registered trademarks are the property of their respective companies.

Printed in the U.S.A.

12/13