MDF76-2836PCFA(41)

Crimped contact

MDF76-30P-1C

Plug

Horizontal insertion !

Insert

Figure 2. Crimped Contact Insertion

10

MDF76-30P-1C

Figure 3. Angular mating / unmating

PCB

MDF76 # W-30S-1H(**)

Receptacle

20° Max.

Mating / unmating of the connectors should be done in the direction

parallel to the receptacle’s mounting surface. Do not attempt to

mate/unmate in any other direction.

Note: The connectors will self-guide themselves within the 20° angle,

as shown in Fig. 3.

Contact must be inserted horizontally oriented as shown on Fig. 2

Do NOT attempt to insert crimped contact in any other direction.

Do not mate / unmate the connectors when the receptacle is NOT

mounted on the PC board.

Differences in color shade of molded components will not affect form, fit

or function.

Contact HRS if additional information is required.

9.Connector mating / unmating

8.Crimped contact insertion

10.Precautions

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.