A

B

C

D

E

F

H

I

J

K

L

M

N

O

P

Q

R

S

T

PFT-FRB010AF2OSCAMSSL | PFT

PRESSURE SENSORS

Illustration may differ

Ordering information

Type

Part no.

PFT-FRB010AF2OSCAMSSL

6042458

Other models and accessories

www.sick.com/PFT

Detailed technical data

Features

Medium

Liquid, gaseous

Pressure type

Gauge pressure

Measuring range

0 bar ... 10 bar

Process temperature

–30 °C ... +100 °C

Output signal

4 mA ... 20 mA, 2-wire

Performance

Non-linearity

≤ ± 0.2 %, of span (Best Fit Straight Line, BFSL) according to IEC 61298-2

Accuracy

≤ ± 0.25 % of the span = ± 0.25% of span (optional for pressure ranges = 0.25 bar). Applies

inclusive of non-linearity, hysteresis, non-repeatability, zero point and full scale error (corre-

sponds to error of measurement as per IEC 61298-2) calibrated in vertical installation position

= ± 0.25% of span (optional for pressure ranges = 0.25 bar). Applies inclusive of non-linearity,

hysteresis, non-repeatability, zero point and full scale error (corresponds to error of measure-

ment as per IEC 61298-2) calibrated in vertical installation position

Non-repeatability

≤ ± 0.1 % of the span

Response time (10 % ... 90 %)

≤ 1 ms ≤ 10 ms at medium temperatures below < –30°C for pressure ranges up to 25 bar or

with flush-mounted membrane

Long-term drift/one-year stability

≤ ± 0.2 % of span (at reference conditions)

Temperature coefficient in rated tempera-

ture range

Mean TC of zero: ≤ 0.2 % of span / 10 K (< 0.4 % for pressure ranges ≤ 0.25 bar), Mean TC of

span ≤ 0.2 % of span / 10 K

Rated temperature range

0 °C ... +80 °C

Service life

Minimum 10 Mio. life cycles

Mechanics/electronics

Wetted parts

Flush-mounted membrane: Stainless steel 1.4571 with NBR O-ring or FKM O-ring (FKM with in-

tegrated cooling element)

Internal transmission fluid

Synthetic oil (Not available for version with standard membrane for pressure ranges > 25 bar)

Pressure port

Front-flush membrane

Housing material

Stainless steel 1.4571

Electrical connection

Round connector M12 x 1, 4-pin, IP 67

Supply voltage

10 V DC ... 30 V DC

14 V DC ... 30 V DC with output signal 0 V ... 10 V

Electrical safety

Overvoltage protection: 36 V DC

2

FLUID SENSORS | SICK

Online data sheet | 2017-01-16 15:56:27

Subject to change without notice