2

INSTALLATION INSTRUCTIONS

WIRING

WARNING: High voltage is present on the coil terminals. Do Not touch the coil terminals or

tower when the engine is cranking or running.

Red

Connects to a switched 12 volt source.

Black

Connects to ground on the engine.

Green

Connects to the coil negative (-) terminal.

Trigger Pickup Wires

White

If the distributor is triggered by breaker points or an amplifier, this wire needs to be

spliced to its trigger wire.

Violet

If the distributor uses a magnetic pickup, this wire needs to be spliced into the positive

mag pickup wire.

Figure 3 Wiring to a Points/Amplifier Ignition.