T89C5121-ICSIL datasheet(27/110 Pages) ATMEL

27 / 110 page

T8xC5121

4164E–SCR–02/04

Smart Card Interface Block (SCIB)

Introduction

The SCIB provides all signals to directly interface a smart card. Compliance with the

ISO7816, EMV’2000, GSM and WHQL standards has been certified.

Both synchronous (e.g. memory card) and asynchronous smart cards (e.g. micropro-

cessor card) are supported. The component supplies the different voltages requested by

the smart card. The power-off sequence is directly managed by the SCIB.

The card presence switch of the smart card connector is used to detect card insertion or

card removal. In case of card removal, the SCIB de-activates the smart card using the

de-activation sequence. An interrupt can be generated when a card is inserted or

removed.

Any malfunction is reported to the microcontroller (interrupt + control register).

The different operating modes are configured by internal registers.

Main Features

•

Support of ISO/IEC7816

•

Character mode

•

1 transmit buffer + 1 receive buffer

•

11 bits ETU counter

•

9 bits guard time counter

•

24 bits waiting time counter

•

Auto-character repetition on error signal detection in transmit mode

•

Auto-error signal generation on parity error detection in receive mode

•

Power-on and power-off sequence generation

•

Manual mode to directly drive the card I/O

T89C5121-ICSIL 데이터시트(PDF) 27 Page - ATMEL Corporation