7

Patient Care Unit with Standard Laminate or Optional Terreon® Top

Installation Instructions

LC700, LC750

Bradley Corporation • 215-1171 Rev. D; EN 04-1037

8/16/04

Installation Instructions

continued . . .

Step 5a: Install the optional

Terreon® lavatory top

1. Apply a bead of silicone caulk around

the outer top edge of the cabinet and

between the lavatory top and the wall.

2. Set the lavatory top in place on the

cabinet making sure the back and wall

sides are flush with the edge of the

cabinet (see Figure 12).

3. Clean up any excess caulk.

Step 6: Install faucet and connect

water supply

FOOT VALVE MODELS (see Figures 13 and 14)

1. Place the faucet onto the countertop, gently inserting the faucet

supply shank through the hole provided in the lavatory bowl.

2. Using the washer and wingnut provided, mount the faucet to the

countertop by tightening the wingnut on the faucet's supply

shank.

3. Connect the flexible supply hose provided from the foot pedal

valve to the supply shank.

4. Connect the hot and cold water supply (piping supplied by

installer) to the 1/2” NPT inlet connectors on the foot valve (see

Figure 14).

FAUCET VALVE MODELS (see Figure 15)

1. Place the faucet onto the countertop, gently inserting the faucet supply shanks through the

holes provided in the lavatory bowl.

2. Using the washers and wingnuts provided, mount

the faucet to the countertop by tightening the

wingnut on the faucet's supply shanks.

3. Connect the hot and cold water supply (piping

supplied by installer) to the 1/2” NPT inlet

connectors on the foot valve.

Figure 13

Figure 14

GOOSENECK

SPOUT

LAVATORY

BOWL

SUPPLY

SHANK

SUPPLY

HOSE

SUPPLY

HOSE

FOOT

VALVE

FOOT VALVE

OUTLET

CONNECTION

HOT

INLET

COLD

INLET

FOOT VALVE

INLET

CONNECTORS

Figure 15

WINGNUT

COUNTERTOP

1/2” NPT

HOT INLET

1/2” NPT

COLD INLET

WASHER

LAVATORY

BOWL

Figure 12

BEAD OF

CAULK

BEAD OF

CAULK