For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

6

HMC1040LP3CE

v00.0112

GaAs pHEMT MMIC LOW NOISE

AMPLIFIER, 24 - 43.5 GHz

item

Description

J1-J4

2.92 mm Connectors

Tp5-Tp8

Test points DC pin

C1 - C3

100 pF Capacitor, 0402 Pkg.

C4 - C6

10 nF Capacitor, 0402 Pkg.

C7 - C9

4.7 µF Capacitor, Tantalum

U1

HmC1040lp3Ce Amplifier

600-00271-00-2 evaluation pCB

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board material: rogers 4350 or Arlon 25fr

The circuit board used in this application should

use RF circuit design techniques. Signal lines

should have 50 ohm impedance while the pack-

age ground leads and exposed paddle should be

connected directly to the ground plane similar to

that shown. A sufficient number of via holes should

be used to connect the top and bottom ground

planes. The evaluation board should be mounted

to an appropriate heat sink. The evaluation circuit

board shown is available from Hittite upon request.

Evaluation PCB

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D