Iss1 C1u

Date 13-7-2011

5. Performance

5-1. Maximum Ratings

Rating

Value

Unit

Source Power (s. imp. 50Ω, duty cycle 1:100)

20

dBm

Source Power (source impedance 50Ω)

10

dBm

DC Voltage

0

V

Storage Temperature Range

-40 to +85

Operating Temperature Range

-40 to +85

5-2. Electronic Characteristics

Characteristic

Minimum

Typical

Maximum

Unit

Center Frequency

--

140.00

--

MHz

Insertion Loss (@140.00MHz)

IL

--

--

13

dB

3dB Bandwidth

16

--

--

MHz

Amplitude Ripple (max peak to adjacent valley)

Δα

133.60 …. 146.40 MHz

--

0.5

0.9

dB

Phase Ripple (p-p)

Δφ

133.60 …. 146.40 MHz

--

7

14

°

Relative Attenuation (relative to IL)

100.00 …. 128.70 MHz

128.70 …. 129.00 MHz

151.00 …. 152.30 MHz

152.30 …. 195.18 MHz

40

40

40

40

45

45

45

45

--

--

--

--

dB

dB

dB

dB

Group Delay Ripple (p-p)

Δτ

133.60 …. 146.40 MHz

--

80

140

ns

Reflected Wave Signal Suppression

0.70μs …. 3.75μs after main pulse

35

38

--

dB

Temperature Coefficient of Frequency

--

-87

--

ppm/K

CAUTION: Electrostatic Sensitive Device. Observe precautions for handling!

1.

2.

Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is

connected to a 50Ω test system with VSWR≤1.2:1. The test fixture L and C are adjusted for minimum insertion

the impedance matching component values and quality.

3.

Unless noted otherwise, specifications apply over the entire specified operating temperature range.

4.

The specifications of this device are based on the test circuit shown above and subject to change or obsolescence

without notice.

5.

All equipment designs utilizing this product must be approved by the appropriate government agency prior to

manufacture or sale.

6.

Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications,

processes and circuits implemented within components or assemblies.

Page 2 of 2