3

5. Performance

5-1. Maximum Ratings

Rating

Value

Unit

Source Power

18

dBm

DC Voltage

0

V

Storage Temperature Range

-40 to +85

℃

Operating Temperature Range

-40 to +85

℃

5-2. Electronic Characteristics

Characteristic

Minimum

Typical

Maximum

Unit

Center Frequency

--

70.0

--

MHz

Insertion Loss (@70.00MHz)

IL

--

14.5

16.0

dB

-1dB BW

27.0

29.0

MHz

Pass band width

-40dB BW

34.8

36.0

MHz

Ultimate Rejection

<Fc-18MHz

>Fc+18MHz

40

40

50

50

dB

Amplitude Ripple

0.8

1.2

dB

Phase Linearity (90%of 1dB Bandwidth)

5.0

10

degree

τ

C

1.12

--

μs

Group Delay Ripple (fc+/-14MHz)

Δ

τ

--

80

120

ns

Temperature Coefficient of Frequency

--

-70

--

ppm/K

○

C ACT 2012. All Rights Reserved.

NOTE:

1.

2.

Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is

connected to a 50Ω test system with VSWR≤1.2:1. The test fixture L and C are adjusted for minimum insertion

the impedance matching component values and quality.

3.

Unless noted otherwise, specifications apply over the entire specified operating temperature range.

4.

The specifications of this device are based on the test circuit shown above and subject to change or obsolescence

without notice.

5.

All equipment designs utilizing this product must be approved by the appropriate government agency prior to

manufacture or sale.

6.

Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications,

processes and circuits implemented within components or assemblies.