LM7372IMAX datasheet(6/15 Pages) NSC

6 / 15 page

±5V AC Electrical Characteristics (Continued)

Note 4: The maximum power dissipation is a function of T(JMAX), θJA, and TA. The maximum allowable power dissipation at any ambient temperature is PD =

(T(JMAX) –TA)/θJA. All numbers apply for packages soldered directly into a PC board. The value for θJA is 106˚C/W for the SOIC 16 package. With a total area of

4sq. in of 1oz CU connected to pins 1,6,8,9 & 16,

θJA for the SOIC 16 is decreased to 70˚C/W.

Note 5: Typical values represent the most likely parametic norm.

Note 6: All limits are guaranteed by testing or statistical analysis.

Note 7: Large signal voltage gain is the total output swing divided by the input signal required to produce that swing. For VS = ±15V, VOUT = ± 10V. For VS = ±5V,

VOUT = ±2V

Note 8: Slew Rate is the average of the rising and falling slew rates.

Note 9: Differential gain and phase are measured with AV = +2, VIN =1VPP at 3.58 MHz and output is 150Ω terminated.

Typical Performance Characteristics

Harmonic Distortion vs. Frequency

20004904

Harmonic Distortion vs. Frequency

20004905

Harmonic Distortion vs. Frequency

20004906

Harmonic Distortion vs. Frequency

20004907

LM7372IMAX 데이터시트(PDF) 6 Page - National Semiconductor (TI)

LM7372IMAX 데이터시트(HTML) 6 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

데이터시트 다운로드

링크 URL