MLY02.100

MiniLine

MLY-Series

Weight

140g / 0.31lb

DIN-Rail

Use 35mm DIN-rails according to EN 60715 or EN 50022 with a height of 7.5 or 15mm.

The DIN-rail height must be added to the unit depth (91mm) to calculate the total required

installation depth.

Installation clearances

See chapter 2

Fig. 14-1 Front view

Fig. 14-2 Side view

DIN-Rail bracket for wall or panel mount:

A suitable DIN-rail bracket is available on request.

The picture of the power supply is for representation only

Apr. 2014 / Rev. 1.3 DS-MLY02.100-EN

All parameters are specified at 24V, 10A output current, 25°C ambient and after a 5 minutes run-in time unless otherwise noted

www.pulspower.com Phone +49 89 9278 0

Germany

13/16