BISM2 Bluetooth™

Hardware Integration Guide

Embedded Wireless Solutions Support

Center: http://ews-

support.lairdtech.com

www.lairdtech.com/bluetooth

21

Laird

Americas: +1-800-492-2320

Europe: +44-1628-858-940

Hong Kong: +852-2268-6567 x026

Parameter

Specification (40 pin board to board connector)

Insertion Force

21.8 N

Withdrawal Force 1

st

10 N

Withdrawal force 50

th

10 N

Maximum Connection Cycles

50

9.1 Bluetooth Qualification Process

The following safety precautions must be observed during all phases of the operation, usage, service, or

repair of any application incorporating this module. Manufacturers of the RF equipment are advised to

convey the following safety information to users and operating personnel and to incorporate these guidelines

into all manuals supplied with the product. Failure to comply with these precautions violates safety standards

of design, manufacture, and intended use of the product. Laird assumes no liability for customer failure to

comply with these precautions.

9.2 Safety Information

Switch off the Bluetooth device before boarding an aircraft. Make sure it cannot be switched on

inadvertently. To prevent interference with communications systems, the operation of wireless appliances in

an aircraft is forbidden by many airlines. Applications that could result in use on aircraft should carry

appropriate warnings.

9.3 Qualifications

9.3.1 RF Approvals

The module is listed as a Bluetooth Product in terms of the Bluetooth SIG Program Reference Document

(PRD). This means that it can be integrated into end products without further testing or approval listing. The

manufacturer must state the Laird part number and product reference in his literature in order to meet the

requirements of the Bluetooth and regulatory approvals.

Laird provides a list of the countries where the module is approved as required. As a minimum, the product is

listed in Europe, Scandinavia, and USA. Laird assumes no liability for customer failure to comply with national

RF approvals.

9.3.1.1

EMC Emissions

EN 300 328 V1.5.1 (2004-08)

9.3.1.2

EMC Immunity

EN 301 489-1 V1.4.1 (2002-08)

9.3.1.3

FCC

FCC Part 15.247:2004 (Subpart C)

FCC ID: PI401B