Innovative Technology

for a Connected World

MRC150,DH2,DV

Re-circulating Chiller

THR-DS-MRC150 0910

Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with

the end user, since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the fitness, merchantability or suitability of any Laird Technologies materials or products for any specific or

general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of

which will be furnished upon request. © Copyright 2010 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an

affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights. Document A16311-00 Rev A, 09/17/2010.

Thermal Capacity

ΔT = Outlet Fluid Temperature - Ambient Temperature

Pumping Capacity

Notes

1. Use distilled water as coolant for control temperatures above 5°C.

2. To prevent freezing, use coolant with 70% distilled water and 30% pure ethylene glycol mix for control temperatures at or below 5˚C.

3. For alternate coolants please contact Laird Technologies.

4. Unit comes with a 115 VAC North American cord and a 230 VAC European cord.

Model Nomenclature

Performance Curves

19.5 cm REF

[7.683 in]

18.4 cm REF

[7.24 in]

30.4 cm REF

[11.97 in]

35.1 cm REF

[13.82 in]

Reservoir

(250 mL Capacity)

26.1 cm REF

[10.28 in]

RS-232 COM Port

(RS-485 Optional)

Quick-Connect

Fluid Input

(3/8” I.D. Tubing)

Quick-Connect

Fluid Output

(3/8” I.D. Tubing)

(2) Male Couplings Supplied with Unit.

Power Entry

Module/Breaker

Digital Controller

Low Fluid Level

Indicator