Data brief

For further information contact your local STMicroelectronics sales office.

October 2010

Doc ID 18050 Rev 1

1/3

3

ST6-EPB

ST6 EPROM programmers

Features

OTP memory

family with support for all corresponding

packages

a complete package that includes:

– Programming board with complete range of

sockets

–Power supply

– Parallel or 25-pin serial cable for host PC

interface

– Software tools on CD-ROM

Description

The ST6-EPB programming board is designed for

single-site programming of EPROM or OTP ST6

microcontrollers.

The ST6-EPB supports two operating modes,

either in standalone mode, or whilst connected to

a PC.

In standalone mode, microcontrollers can be

programmed by simple key operation. The

programmer also supports Blank-check and Verify

tests in standalone mode.

The ST6-EPB can be also connected via a serial

or parallel interface to a host PC running the ST6

Windows EEPROMER (WINEE software). The

ST6 EPROM offers Read, Program, Verify and

Blank-check features along with many other

functions.

Table 1.

Device summary

Part number

Reference

ST6-EPB

– ST62E2XC-EPB for

ST62E0x/T0x/E1x/T1x/E2x/T2x

devices

– ST62E3X-EPB for

ST62E3x/T3x devices

– ST62E4XB-EPB for

ST62E4x/T4x devices

– ST62E6XC-EPB for

ST62E5x/T5x/E6x/T6x devices

www.st.com

Obsolete

Product(s)

- Obsolete

Product(s)