전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

STUSB1600 데이터시트(PDF) 21 Page - STMicroelectronics

부품명 STUSB1600
상세설명  Power hubs and docking stations
PDF  69 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  STMICROELECTRONICS [STMicroelectronics]
홈페이지  http://www.st.com
Logo STMICROELECTRONICS - STMicroelectronics

STUSB1600 데이터시트(HTML) 21 Page - STMicroelectronics

Back Button STUSB1600 Datasheet HTML 17Page - STMicroelectronics STUSB1600 Datasheet HTML 18Page - STMicroelectronics STUSB1600 Datasheet HTML 19Page - STMicroelectronics STUSB1600 Datasheet HTML 20Page - STMicroelectronics STUSB1600 Datasheet HTML 21Page - STMicroelectronics STUSB1600 Datasheet HTML 22Page - STMicroelectronics STUSB1600 Datasheet HTML 23Page - STMicroelectronics STUSB1600 Datasheet HTML 24Page - STMicroelectronics STUSB1600 Datasheet HTML 25Page - STMicroelectronics Next Button
Zoom Inzoom in Zoom Outzoom out
 21 / 69 page
background image
DocID028937 Rev 1
21/69
STUSB1600
Features description
69
The STUSB1600 goes into error recovery state when at least one condition listed below is
met:
Whatever the power role:
If an overtemperature is detected, the “THERMAL_FAULT” bit set to 1b
In source power role only:
If an internal pull-up voltage on CC pins is below UVLO threshold, the
“VPU_VALID” bit set to 0b.
If an overvoltage is detected on the CC pins, the “VPU_OVP_FAULT” bit set to 1b
–If the VBUS voltage is out of the valid voltage range during attachment, the
“VBUS_VALID” bit set to 0b.
If an undervoltage is detected on the VDD pin during attachment when UVLO
detection is enabled, the “VDD_UVLO_DISABLE” bit set to 0b.
If an overvoltage is detected on the VDD pin during attachment when OVLO
detection is enabled, the “VDD_OVLO_DISABLE” bit set to 0b.
The I2C register bits mentioned above in quotes give either the state of the hardware fault
when it occurs or the setting condition to detect the hardware fault (see Section 5.1:
Register description).
3.8
Accessory mode detection
The STUSB1600 supports the detection of audio accessory mode and debug accessory
mode as defined in the USB Type-C standard specification with the following Type-C power
modes (see Section 6: Start-up configuration):
Source power role with accessory support
Sink power role with accessory support
Dual power role with accessory support
Dual power role with accessory and Try.SRC support
Dual power role with accessory and Try.SNK support.
3.8.1
Audio accessory mode detection
The STUSB1600 detects an audio accessory device when both the CC1 and CC2 pins are
pulled down to ground by an Ra resistor from the connected device. The audio accessory
detection is advertised through the CC_ATTACHED_MODE bits of the I2C register
CC_CONNECTION_STATUS (see Section 5.1: Register description).



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com