Absolute maximum ratings and operating conditions

STCC5011, STCC5021

6/37

DocID024660 Rev 6

3

Absolute maximum ratings and operating conditions

Stressing the device beyond the rating listed in Table 2: Absolute maximum ratings (AMR)

may cause permanent damage to the device. These are stress ratings only and functional

operation of the device at these or any other conditions beyond those indicated in Table 3:

Operating conditions is not implied. Exposure to absolute maximum rating conditions for

extended periods may affect device reliability.

Table 2. Absolute maximum ratings (AMR)

Symbol

Parameter

Value

Unit

Supply voltage

-0.3 to 6.5

V

Pull-up resistor voltage (FAULT, CHARGING/ATTACH)

Data switch pin voltage to ground

V

Data switch current, switch ON

±50

mA

Maximum power switch output current, power switch ON

Internally limited

A

Logical output sink current

25

mA

-55 to +150

°C

Lead solder temperature for 10 second temperature

260

60

°C/W

Maximum junction temperature range (internally limited)

°C

8

kV

JEDEC human body model (all pins)

2

JEDEC machine model (all pins)

200

V

1. Reflow at temperatures of 255 °C to 260 °C for time < 30 seconds (total thermal budget not to exceed

180 °C for a period from 90 to 150 seconds).

3. Measured in a recommended application circuit with a 1

μF ceramic capacitor + 150 μF low ESR electrolytic capacitor

connected between OUT and GND pins (see Figure 4).

Table 3. Operating conditions

Symbol

Parameter

Value

Unit

Supply voltage

4.5 to 5.5

V

Supply voltage

1.7 to 5.5

Ambient operating temperature

-40 to +85

°C

Junction operating temperature

-40 to +125