전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

UM1018 데이터시트(PDF) 9 Page - STMicroelectronics

부품명 UM1018
상세설명  STM32L152-EVAL evaluation board
PDF  42 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  STMICROELECTRONICS [STMicroelectronics]
홈페이지  http://www.st.com
Logo STMICROELECTRONICS - STMicroelectronics

UM1018 데이터시트(HTML) 9 Page - STMicroelectronics

Back Button UM1018 Datasheet HTML 5Page - STMicroelectronics UM1018 Datasheet HTML 6Page - STMicroelectronics UM1018 Datasheet HTML 7Page - STMicroelectronics UM1018 Datasheet HTML 8Page - STMicroelectronics UM1018 Datasheet HTML 9Page - STMicroelectronics UM1018 Datasheet HTML 10Page - STMicroelectronics UM1018 Datasheet HTML 11Page - STMicroelectronics UM1018 Datasheet HTML 12Page - STMicroelectronics UM1018 Datasheet HTML 13Page - STMicroelectronics Next Button
Zoom Inzoom in Zoom Outzoom out
 9 / 42 page
background image
UM01018
Hardware and layout
Doc ID 18141 Rev 2
9/42
2.3
Clock source
Two clock sources are available on the STM32L152-EVAL evaluation board for the
STM32L152VBT6 and embedded RTC.
●
X1, 32 KHz crystal for embedded RTC
●
X2, 8 MHz crystal with socket for the STM32L152VBT6 microcontroller, it can be
removed from the socket when an internal RC clock is used.
2.4
Reset source
The reset signal of the STM32L152-EVAL evaluation board is low active and the reset
sources include:
●
Reset button B1
●
Debugging Tools from JTAG connector CN9 and trace connector CN8
●
Daughterboard from CN7
●
Embedded ST-LINK/V2
●
RS-232 connector CN2 for ISP
Note:
Jumper JP9 must be changed for RESET. This is handled by pin8 of the RS-232 connector
CN2 (CTS signal), refer to Section 2.9 for details.
Table 2.
32 KHz crystal X1 related solder bridges
Solder bridge
Description
SB1
PC14 is connected to 32 KHz crystal when SB1 is open (default setting).
PC14 is connected to extension connector CN6 when SB1 is closed. In such
case R37 must be removed to avoid disturbance due to the 32 KHz quartz.
SB4
PC15 is connected to 32 KHz crystal when SB4 is open (default setting).
PC15 is connected to extension connector CN6 when SB4 is closed. In such
case R38 must be removed to avoid disturbance due to the 32 KHz quartz.
Table 3.
8 MHz crystal X2 related solder bridges
Solder bridge
Description
SB2
PH1 is connected to 8 MHz crystal when SB2 is open (default setting).
PH1 is connected to extension connector CN7 when SB2 is closed. In such case
R39 must be removed to avoid disturbance due to the 8 MHz quartz.
SB3
PH0 is connected to 8 MHz crystal when SB3 is open (default setting).
PH1 is connected to extension connector CN7 when SB3 is closed. In such case
C30 and X2 must be removed.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com